Audix ADX20-IP Instrument Microphone

The ADX-20i is a pre-polarized condenser microphone designed to handle a wide variety of clip-on applications. The ADX20i is sonically better as well as pleasing to the eye. You're suer to find that it'ss ideally suited for saxophone, trombone, trumpet and other brass instruments. With a smooth uniform response over a frequency range of40 Hz – 20 kHz, the ADX-20i provides a rich, warm sound not typical of microphones this size. It is machined from solid brass and has a low reflective black e-coat finish. The ADX-20i operates on phantom power (9-52 volts) with the preamp module provided (APS-910). It may be used in battery mode with optional phantom power adapter (APS-911). The ADX-20i can be utilized with a wireless system. Depending on the brand of wireless and the connector configuration of the instruments body pack, the ADX-20i connector would need to be modified accordingly. Low noise electronic circuitry, and balanced low impedanceoutput allow for interference free performance even with long cable runs.   This Item Ships For Free (Alaska & Hawaii Excluded)

Features:

• High tension spring clamp keeps mic in place
• Multi-position gooseneck
• Highly accurate sound reproduction
• Available in hypercardioid version (ADX-20i/hc)

Specifications:

• Transducer Type Condenser (pre-polarized)
• Frequency Response: 40 Hz - 20 kHz
• Polar Pattern: Cardioid, Hypercardioid (ADX20i-hc)
• Output Impedance: 250 Ohms balanced
• Open Circuit Sensitivity: 5.2 mV
• Equivalent Noise Level: 29 dB (A weighted)
• Signal to Noise Ratio: 65 dB (ref 1k @ 1 Pascal)
• Power Requirements: 9 - 52v phantom
• Maximum SPL: 130 dB
• Cable/Connector Shielded 6’ cable terminating to aminiature 3 pin XLR-f
• Phantom Adapter: mini XLR male - XLR male
• Polarity: Positive voltage on pin 2 relative to pin 3ofoutput XLR connector
• Housing: Machined Brass
• Gooseneck: Flexible steel
• Weight: 1.7 oz/4.7 grams (without cable)