Audix MicroBoom MB1290 w/ Optional Stand

MicroBoom with M1290 Micros Series Cardioid Condenser Mic
The Audix MicroBoom is a 50-inch boom arm that attaches to any microphone stand. Designed as an accessory for the Audix Micros series of miniature condenser microphones, the MicroBoom has a diameter of less than .3 inches (7.4 mm) and weighs in at only 2.5 ounces (70.8 grams). To guarantee long life on the road, the Audix MicroBoom is constructed of carbon fiber, which is known for being lightweight, rigid, and durable. So strong and durable in fact, carbon fiber is being utilized to fabricate parts for race bikes, motorcycles, formula one cars, aerospace, and the military. The Audix M1290 microphone itself is the world's smallest condenser microphone with an integrated preamp and detachable cable. The Audix M1290 is a studio-quality mic with very low noise, wide dynamic range, and high quality performance. For a great-sounding solution to difficult miking situations, or just good ol' stealth-miking, it's the Audix MB1290 .This Item Ships For Free (Hawaii & Alaska Excluded)


Audix MB1290 Microboom at a Glance:

• 50-inch carbon fiber boom for Audix M1290 mini-condenser mic
  
• Mini-XLR connector with Mogami cableholds microphone in place

Audix M1290 mini-condenser mic
The Audix M1290 is designed with a fully integrated low-noise preamplifier within the barrel of the microphone housing. Therefore, no external power supply is needed as is normally the case with electret microphones of this size. The elimination of the power supply along with the ability to "hide" the cable within the guides provided in the metal clip makes for an ultra-clean, professional, and elegant appearance. The microphone comes packed in an elegant rosewood box with a brass latch and hinges. Inside you'll find a plush interior, 12-foot mini XLR-XLR adapter cable, a windscreen, and clip. Featuring solid construction and elegant looks, the Audix M1290 microphone is machined brass housing has a black "e-coat" finish with gold lettering, and is 3.5 inches long with a diameter of less than half an inch and weighs only a single ounce. Each microphone has its serial number etched on the finish. M1290-hc has a hypercardioid polar pattern, a frequency response of 40Hz-20kHz, the signal to noise ratio is 75dB. The M1290 is fully balanced, with an output impedance of 250 ohms, and can run through 150 feet of cable without degradation in frequency response.

Mini-XLR connector Secures Mic
The upper end of the MicroBoom features a mini-XLR connector which securely holds the microphone in place and also allows for easy access when changing out microphones. High quality Mogami cable is used internally to insure the highest quality audio signal path between the microphone and the bottom of the boom, which terminates in a mini-XLR male connector. The stand adapter designed for the MicroBoom allows for total control over the angle, rotation, and position of the carbon fiber rod. A metal thumbscrew locks the rod firmly in place. The final angle and position of the microphone is controlled by using the flexible metal gooseneck just below the microphone.

Audix MicroBoom Applications:

• Acoustic instruments
  
• Ambient room miking
  
• Symphonic area miking
  
• Overhead mic for choir, group vocal

Audix M1290 Features:

• Excellent for both recording and live applications
  
• Miniaturized integrated preamplifier
  
• No additional external power adapter needed
  
• 40hZ-20kHz frequency range
  
• cardioid pattern
  
• Mini-XLR connector
  
• 12mm gold vapor diaphragm
  
• Fully balanced for long cable runs (up to 150')
  
• Extremely low-noise
  
• Hi-SPL handling; 138dB (over 144 dB with M1244)
  
• Lightweight

Audix Microboom Features:

• 50-inch, lighweight, durable carbon fiber construction
  
• Mini-XLR connector securely holds microphone in place
  
• Easy access when changing out microphones.
  
• High-quality Mogami cable used internally to insure highest quality signal path between microphone and the bottom of boom.
  
• Boom Terminates in a mini-XLR male connector.
  
• Stand adapter allows for total control over angle, rotation, and position of the carbon fiber rod.
  
• Metal thumbscrew locks rod firmly in place.
  
• Angle and position of the microphone is controlled by flexible metal gooseneck

The Audix MicroBoom - an ultra-clean, professional, and elegant miking solution.